When choosing a linear module, you will need to consider speed as well as accuracy, the maximum stroke and maximum load.
Driven by a steel wire belt, the CCM belt driven linear rail we can offer is built specifically for high speed and low noise. Currently with a pitch range from 54mm to 190mm, the maximum speed (without load) is 10 m/s, depending on the type of stepper or servo motor used.
How do I calculate the speed?
The actual speed will be affected by factors such as payload and stroke length, but an example calculation would be:
A W40-06 linear rail with a pitch of 75mm, using a servo motor with a rated speed of 3000rpm/min – the maximum speed is 75mm x 3000rpm/min/60=3.75m/s.
3.75m/s is the ideal speed.
Please just get in touch if you want any technical assistance or to chat further about your requirements.